Also here for your property? Property Owners →

Home care

Heating and cooling: filters, thermostats and who does what

Residents change the air filter, keep vents and outdoor units clear and set the thermostat. Servicing and repairs are our job. A clogged filter can shut a system down, so check it first.

Key points

  • Your jobs: change the filter, keep vents and the outdoor unit clear, set the thermostat and replace its batteries.
  • Our jobs: servicing, repairs and anything inside the furnace, heat pump or air conditioner.
  • Check the filter first when the system will not run or blows weakly.
  • Never open a furnace or air-handler panel, touch a pilot light or work on the outdoor unit.
  • No heat in freezing weather is an emergency. Call us.
  • Keep a dated photo of the new filter, or the receipt.

Stop and call

  • Call 911 for a gas smell, a strong burning smell, a carbon monoxide alarm, smoke or fire. Leave first.
  • Call us for water around the unit, a system that makes loud banging or grinding noises, or no heat in freezing weather.

Call (509) 525-1040, Monday to Friday, 9:00 AM to 4:00 PM. The same number is for after-hours property emergencies.

What system does my home have?

Homes in Walla Walla and College Place heat and cool in different ways. Common systems include a gas or electric furnace, a heat pump, electric baseboard heaters, and central or wall air conditioning. Some homes have no air conditioning. If you are not sure what your home has, ask us.

The filter steps below apply to forced-air systems. Baseboard heaters have no filter. Keep furniture and curtains away from them.

How do I check and change the filter?

  1. Find it. The filter sits in a slot at the furnace or air handler, or behind a return-air grille in a wall or ceiling. Some homes have more than one.
  2. Turn the thermostat to off before you slide the old filter out.
  3. Hold the old filter to a light. If you cannot see light through it, replace it.
  4. Read the size printed on the filter’s frame. Buy the same size.
  5. Slide the new filter in with the arrow on its frame pointing toward the furnace or air handler, the way the air flows.
  6. Turn the thermostat back on.

Check the filter about once a month in winter and summer. Replace it when it is gray and clogged, and at least every few months. Homes with pets or heavy dust need it more often. Keep a dated photo of the new filter, or the receipt, as a record that you changed it.

How do I set the thermostat?

  • Mode: set it to Heat in cold weather and Cool in hot weather. Auto switches between them.
  • Temperature: set it a few degrees above the room temperature to test the heat, or below it to test the cooling. The system should start within a few minutes.
  • Blank screen: replace the batteries. Most thermostats use AA or AAA batteries behind a small cover or on the back of the faceplate.
  • Hold or schedule: a hold keeps a temperature until you cancel it. A schedule changes it by time of day. If the home does not follow your setting, cancel the hold.
  • Fan: Auto runs the fan only when heating or cooling. On runs it all the time.

What else keeps the system working?

  • Keep vents and return grilles clear of furniture, curtains, rugs and boxes. Vacuum dust from the grilles.
  • Keep the outdoor unit clear of leaves, snow, weeds and stored items. Leave open space on every side so air can move through it. Do not open it or touch its disconnect box.
  • Keep your utility account active. A suspended gas or electric service stops the heat.
  • Never heat the home with an oven or a stovetop. Never run a grill, generator or fuel-burning heater indoors or in a garage.

Space heaters

Do not rely on a space heater in place of the home’s heat. If you use one for a short time, never leave it running while you sleep or are out. Plug it straight into a wall outlet, not an extension cord, and keep it away from anything that can burn.

What is normal?

  • A light dusty smell for a few minutes on the first cold day of the season.
  • Steam from an outdoor heat pump in cold, damp weather. It is defrosting itself.
  • A clicking or humming sound as the system starts and stops.

A smell like rotten eggs, smoke, or a strong burning or electrical smell is not normal. Leave the home without touching any switches, then call 911 from outside. Call us after that.

When do I call, and who pays?

Try the steps above. If the system still does not run, submit a request in the portal. If it is freezing outside and you have no heat, call us. Servicing and repair are our job. Do not work on the air conditioner or other appliances yourself. Your lease says who pays for what, and we will go through it with you if you call (509) 525-1040.

Washington law Washington’s Residential Landlord-Tenant Act sets out a landlord’s duties (RCW 59.18.060) and a tenant’s duties (RCW 59.18.130).

Submit a maintenance request

Questions and answers

How often do I change the filter?

Check it about once a month. Replace it when it is gray and clogged, and at least every few months. Pets and dust mean more often.

Why won’t the heat come on?

Check that the thermostat is set to Heat and above the room temperature, that its batteries are good and that the filter is clean. Check that your gas or electric account is active. If it still will not run, submit a request, or call us if it is freezing outside.

Can I use a space heater?

For a short time, yes. Never leave one running while you sleep or are out, plug it straight into a wall outlet, and never use an oven or a grill for heat. If the heat is out, report it.

Who pays for a furnace repair?

Servicing and repair are our job. Your lease says who pays when damage comes from misuse or neglect.

Last reviewed: .

This page is general information, not legal advice. The lease you signed and Washington law control. If anything here differs from your lease, your lease controls.